Technical rider
- 4 × CDJ
- CDJ-3000 or CDJ-3000X preferred. CDJ-2000NXS2 accepted. Horizontal surface only, with no suspended structures or arms.
- 1 × Mixer
- DJM-A9, DJM-900NXS2 or DJM-V10.
- 1 × Wireless mic
- Connected exclusively to an external mixer. Where possible, also send the microphone back into the stage monitor.
- Stage monitors
- One monitor with subwoofer on the DJ’s left and one monitor with subwoofer on the DJ’s right, with monitor levels adjustable from the DJ console. A fan under the booth.
- Monitor reference
- L-Acoustics Kara / A15 + SB18 / KS21 · d&b V8 + V-Sub · Adamson S10 + S119 / E119 · Meyer Sound Leopard + 900-LFC
- DJ booth
- A stable, professional DJ table with enough room for the complete setup and additional accessories. Flight cases used as tables and cramped booths are not acceptable.
Audio replacements
If specific audio equipment mentioned above is not available, please discuss with the artist’s Production Manager which alternatives are allowed as replacement.
Booth protocol
The booth must remain clear of unauthorized personnel. Only the LJ (when the lighting desk is adjacent), photographers, videomakers, Tour Manager and the artist’s guests are allowed. Provide an escort to the booth and a security guard next to it throughout the performance.
Live camera & visuals
Provide a fixed camera centred on the artist, showing part of the mixer and the artist’s hands. Alternate this feed with the artist’s visuals on the venue screens through Resolume. Visuals must be tested at soundcheck and approved by the artist. Otherwise use the camera feed, preferably throughout the set, with the transparent PNG logo overlaid.
Video cabling and capture are supplied by the promoter: an SDI (BNC, 3G-SDI for 1080p) or HDMI 2.0 run long enough to reach the visuals desk, a capture card (PCIe or USB 3, for example a Blackmagic DeckLink Mini Recorder) with the matching SDI/HDMI and USB-C or Thunderbolt cables, and power at the camera position. For runs longer than 10 metres, use fibre HDMI or an HDMI-to-SDI converter.
Effects
At least two working CO₂ effects are required, including criojet, CO₂ cannons, columns or jets. Confetti, pyrotechnics, flames and sparkular are permitted. Smoke machines are not permitted in enclosed venues.
Warm-up
In the 30 minutes before the artist goes on, no EDM hits. The reference is Tech House and its neighbours: Minimal/Deep Tech, Afro House, Deep House. Energy rises, but without peaks.
Avoid: big room, progressive house, techno, hardstyle.
Performance requirements
In clubs, squares and special-guest events, the preceding DJ must stay at or below 126 BPM, build energy progressively, and avoid commercial hits or high-impact tracks in the final stages. Preferred genres are Afro House, Deep House and Tech House. This guideline does not apply to festivals with varied lineups.
No dancers or dance troupes in front of or near the artist. Additional performers require prior approval from the artist or management. ANGEMI handles all vocal parts. A resident vocalist may introduce the artist before the set only. The wireless microphone must be connected, tested and fully operational before the performance.
Show integrity
No stage announcements or other interruptions during the artist’s set are permitted. The agreed set length is fixed and may not be shortened, interrupted, delayed or otherwise affected under any circumstances.
Visa & documents
The promoter is fully responsible for arranging and paying for all documents, visas and work permits required for the artist’s performance. The promoter must send the advancer all required details and documentation directly after signing the agreement.




































